KASQSite safety, in the crew's language
Start free

← All HSE guidance

HSE web guidance, updated 17 April 2025

Hazardous area classification and Laboratory operations - Electrical safety

Current. Last checked with HSE on 13 November 2026.

Guidance on HSE's website.

Kind
HSE web guidance, updated 17 April 2025
HSE's date
17 April 2025
Last checked
13 November 2026

What it says, in HSE's own words

This guidance is issued by the Health and Safety Executive. Following the guidance is not compulsory, and you are free to take other action. But if you do follow the guidance you will normally be doing enough to comply with the law. Health and safety inspectors seek to secure compliance with the law, and may refer to this guidance as illustrating good practice. Introduction Hazardous area classification is a technique for assessing the probability of formation of a flammable atmosphere and its likely duration.
It has long been a widely used technique in the chemical industry, as a step towards deciding whether electrical and other equipment needs special protective features in order to prevent it causing a fire or explosion. The Dangerous Substances and Explosive Atmospheres Regulations 2002 require a risk assessment of the fire and explosion hazards at a much wider range of workplaces, including laboratories of all kinds. Specifically they require employers to classify areas where explosive atmospheres may form, using the principles of hazardous area classification.

Quoted from HSE. Open the original on hse.gov.uk

Key points

This guidance helps those in control of laboratories assess risks from flammable atmospheres and decide when controls should be improved or an area classified. Employers are required to assess fire and explosion hazards and classify areas where explosive atmospheres may form. The guidance describes 3 zones: Zone 0, where an explosive atmosphere is present continuously or for long periods; Zone 1, where it is likely to occur in normal operation occasionally; and Zone 2, where it is not likely in normal operation but, if it occurs, persists for a short period only. Risk assessments should consider release sources, volatility, temperature, supervision, training, ventilation, ignition sources and consequences. Controls include minimising releases, suitable extraction, spill control, safe equipment placement, leak checks, rapid isolation and trained supervision. Classified areas require electrical and non-electrical equipment to meet specific standards.

Our summary of the document's own words. Check the original before you rely on it.

Machine-translated summary (Polish)

Niniejsze wytyczne pomagają osobom sprawującym kontrolę nad laboratoriami oceniać ryzyko związane z atmosferami palnymi oraz decydować, kiedy należy poprawić środki kontroli lub sklasyfikować obszar. Pracodawcy są zobowiązani oceniać zagrożenia pożarem i wybuchem oraz klasyfikować obszary, w których mogą powstawać atmosfery wybuchowe. Wytyczne opisują 3 strefy: Zone 0, gdzie atmosfera wybuchowa występuje stale lub przez długie okresy; Zone 1, gdzie prawdopodobne jest jej sporadyczne występowanie podczas normalnej pracy; oraz Zone 2, gdzie nie jest prawdopodobna podczas normalnej pracy, lecz jeśli wystąpi, utrzymuje się tylko przez krótki okres. Oceny ryzyka powinny uwzględniać źródła uwolnień, lotność, temperaturę, nadzór, szkolenie, wentylację, źródła zapłonu i skutki. Środki kontroli obejmują ograniczanie uwolnień, odpowiednią ekstrakcję, kontrolę rozlewów, bezpieczne rozmieszczenie sprzętu, sprawdzanie szczelności, szybkie odłączenie oraz nadzór przeszkolonego personelu. W sklasyfikowanych obszarach sprzęt elektryczny i nieelektryczny musi spełniać określone normy.

Machine-translated summary (Romanian)

Aceste îndrumări îi ajută pe cei care controlează laboratoarele să evalueze riscurile atmosferelor inflamabile și să decidă când controalele trebuie îmbunătățite sau când o zonă trebuie clasificată. Angajatorii trebuie să evalueze pericolele de incendiu și explozie și să clasifice zonele în care se pot forma atmosfere explozive. Îndrumările descriu 3 zone: Zone 0, în care o atmosferă explozivă este prezentă continuu sau pentru perioade lungi; Zone 1, în care este probabil să apară ocazional în funcționarea normală; și Zone 2, în care nu este probabil să apară în funcționarea normală, dar, dacă apare, persistă doar pentru o perioadă scurtă. Evaluările riscurilor ar trebui să ia în considerare sursele de eliberare, volatilitatea, temperatura, supravegherea, instruirea, ventilația, sursele de aprindere și consecințele. Controalele includ minimizarea eliberărilor, extracția adecvată, controlul scurgerilor, amplasarea sigură a echipamentelor, verificarea etanșeității, izolarea rapidă și supravegherea de către personal instruit. În zonele clasificate, echipamentele electrice și neelectrice trebuie să îndeplinească standarde specifice.

Related guidance

Contains public sector information published by the Health and Safety Executive and licensed under the Open Government Licence v3.0. KASQ is not affiliated with HSE.