HSE web guidance, updated 22 August 2025
COSHH and woodworkers - key messages - COSHH
Current. Last checked with HSE on 15 November 2026.
Guidance on HSE's website.
- Kind
- HSE web guidance, updated 22 August 2025
- HSE's date
- 22 August 2025
- Last checked
- 15 November 2026
The passage you were sent
What it says, in HSE's own words
Substances hazardous to health in woodworking include: hardwood and softwood dust; dusts from hardboard, plywood, MDF, timber laminates etc; adhesives, paints, stains, varnishes, stripping fluids etc; lubricants; disinfectants to treat water systems. Cleaning can give rise to high levels of wood dust in air. Control measures include: dust extraction; respirators; skin checks; Example: wood dust. Both hardwood and softwood dusts have a Workplace Exposure Limit (WEL) which must not be exceeded.
The WEL for hardwood dust is 3mg/m3 (based on an 8-hour time-weighted average). The WEL for softwood dust is 5mg/m3 (based on an 8-hour time-weighted average). For mixtures of hardwood and softwood dusts the WEL for hardwood dust of 3mg/m3 applies to all wood dusts present in that mixture. Adequate control of wood dust is achieved when: a) The eight principles of good control practice are applied as set out in Schedule 2A of COSHH; b) Exposure is below the relevant WEL; and c) Exposure is reduced to as low a level as is reasonably practicable.
Quoted from HSE. Open the original on hse.gov.uk
Check your RAMS against this document
Related guidance
- COSHH and welders - key messages - COSHH
- Principles of good control practice - COSHH
- Woodworking - COSHH
- Harm via skin or eye contact COSHH Essentials - COSHH
Tell me when HSE changes this
Tell me when HSE changes COSHH and woodworkers - key messages - COSHH. A line in the Monday email when HSE withdraws, replaces, moves or updates this document, and no email when it does not.
Contains public sector information published by the Health and Safety Executive and licensed under the Open Government Licence v3.0. KASQ is not affiliated with HSE.