HSE web guidance, updated 25 February 2025
Segregate workers from the dust source
Current. Last checked with HSE on 15 November 2026.
Guidance on HSE's website.
- Kind
- HSE web guidance, updated 25 February 2025
- HSE's date
- 25 February 2025
- Last checked
- 15 November 2026
The passage you were sent
What it says, in HSE's own words
In some cases, simply using water to suppress dust is not enough. It could even increase the risks, for example, with electrical machinery. In these cases, the best approach is to segregate the dust source from the worker. The large slate cutting machine in this photograph is using water to suppress the dust. The operator is also controlling it from a separate control booth. This helps to keep the exposure to dust low. Don't forget that the control room should be supplied with clean, fresh air.
Otherwise, there is a chance that the dusty air from the machine room will get in. One way of doing this is by keeping the air in the control room at slightly higher pressure than outside. This means the air tends to flow out and not in.
Quoted from HSE. Open the original on hse.gov.uk
Key points
This guidance explains that, where using water to suppress dust is not enough, or could increase risks such as with electrical machinery, the dust source should be segregated from the worker. It describes a large slate cutting machine using water to suppress dust, with the operator controlling it from a separate control booth; this helps keep exposure to dust low. The control room should be supplied with clean, fresh air, because dusty air from the machine room could otherwise get in. One way to do this is to keep the air in the control room at slightly higher pressure than outside, so air tends to flow out rather than in.
Our summary of the document's own words. Check the original before you rely on it.
Machine-translated summary (Polish)
Niniejsze wytyczne wyjaśniają, że gdy używanie wody do tłumienia pyłu nie wystarcza lub może zwiększać ryzyko, na przykład w przypadku maszyn elektrycznych, źródło pyłu powinno być oddzielone od pracownika. Opisują dużą maszynę do cięcia łupka, która używa wody do tłumienia pyłu, przy czym operator steruje nią z oddzielnej kabiny sterowniczej; pomaga to utrzymać narażenie na pył na niskim poziomie. Pomieszczenie sterownicze powinno być zaopatrywane w czyste, świeże powietrze, ponieważ w przeciwnym razie może się do niego dostać zapylone powietrze z pomieszczenia maszyny. Jednym ze sposobów jest utrzymywanie ciśnienia powietrza w pomieszczeniu sterowniczym na nieco wyższym poziomie niż na zewnątrz, aby powietrze miało tendencję do wypływania, a nie napływania.
Machine-translated summary (Romanian)
Aceste îndrumări explică faptul că, atunci când folosirea apei pentru suprimarea prafului nu este suficientă sau ar putea crește riscurile, de exemplu în cazul utilajelor electrice, sursa de praf ar trebui separată de lucrător. Acestea descriu o mașină mare de tăiat ardezie care folosește apă pentru suprimarea prafului, operatorul controlând-o dintr-o cabină de control separată; acest lucru ajută la menținerea expunerii la praf la un nivel scăzut. Camera de control ar trebui alimentată cu aer curat și proaspăt, deoarece, altfel, există posibilitatea ca aerul prăfuit din camera utilajului să pătrundă în aceasta. O modalitate este menținerea aerului din camera de control la o presiune ușor mai mare decât cea de afară, astfel încât aerul să tindă să iasă, nu să intre.
Check your RAMS against this document
Related guidance
- Workers concerned about welding fumes
- High levels of dust in a stonemasonry in Yorkshire
- Company reduces fumes in a Birmingham Welders
- How to protect workers from COPD: Overview
Tell me when HSE changes this
Tell me when HSE changes Segregate workers from the dust source. A line in the Monday email when HSE withdraws, replaces, moves or updates this document, and no email when it does not.
Contains public sector information published by the Health and Safety Executive and licensed under the Open Government Licence v3.0. KASQ is not affiliated with HSE.