HSE web guidance, updated 19 May 2026
Scaffolds
Current. Last checked with HSE on 16 November 2026.
Guidance on HSE's website.
- Kind
- HSE web guidance, updated 19 May 2026
- HSE's date
- 19 May 2026
- Last checked
- 16 November 2026
The passage you were sent
What it says, in HSE's own words
What you need to do The law requires that employers and self-employed contractors assess the risk from work at height and go on to organise and plan the work so it is carried out safely. Suitable precautions must be taken to prevent falls. General access scaffolds provide a means of working at height while preventing falls and should be provided whenever practicable.
Competence and supervision of scaffolding operative Scaffold inspection Requirements for general access scaffolds Scaffolds must be designed, erected, altered and dismantled only by competent people and the work should be carried out under the direction of a competent supervisor. All scaffolding must be erected, dismantled and altered in a safe manner. This can be achieved by following National Access and Scaffolding Confederation (NASC) Safety Guidance SG4 'Preventing falls in scaffolding operations' or by following similar guidance provided by the manufacturers of system scaffolding.
Quoted from HSE. Open the original on hse.gov.uk
Key points
This guidance is for employers, self-employed contractors, scaffold users and hirers, scaffold contractors, designers and scaffolding operatives. It covers planning, designing, erecting, using, altering, dismantling and inspecting scaffolds, with precautions to prevent falls. Scaffolds must be designed, erected, altered and dismantled by competent people under competent supervision, using NASC Safety Guidance SG4 'Preventing falls in scaffolding operations' or similar manufacturers’ guidance. They need suitable foundations, bracing, ties, strength and stability, appropriate duty ratings, safe access and fully boarded platforms. Guard rails, toe boards and barriers must provide fall protection, including a top rail at least 950 mm high and intermediate protection with gaps no greater than 470 mm. Inspections are required before first use, every 7 days and after circumstances such as high winds.
Our summary of the document's own words. Check the original before you rely on it.
Machine-translated summary (Polish)
Niniejsze wytyczne są przeznaczone dla pracodawców, osób prowadzących działalność na własny rachunek, użytkowników i najemców rusztowań, wykonawców rusztowań, projektantów oraz pracowników montujących rusztowania. Obejmują planowanie, projektowanie, montaż, użytkowanie, zmianę, demontaż i kontrolę rusztowań, wraz ze środkami zapobiegającymi upadkom. Rusztowania muszą być projektowane, montowane, zmieniane i demontowane przez osoby kompetentne, pod kompetentnym nadzorem, z zastosowaniem Wytycznych bezpieczeństwa NASC SG4 „Zapobieganie upadkom podczas prac rusztowaniowych” lub podobnych wytycznych producentów. Muszą mieć odpowiednie fundamenty, stężenia, kotwienia, wytrzymałość i stateczność, właściwe klasy obciążenia, bezpieczny dostęp oraz w pełni wyłożone pomosty. Poręcze, krawężniki i bariery muszą zapewniać ochronę przed upadkiem, w tym górną poręcz o wysokości co najmniej 950 mm oraz pośrednią ochronę z odstępami nie większymi niż 470 mm. Kontrole są wymagane przed pierwszym użyciem, co 7 dni oraz po okolicznościach takich jak silny wiatr.
Machine-translated summary (Romanian)
Aceste îndrumări se adresează angajatorilor, contractorilor independenți, utilizatorilor și chiriașilor schelelor, contractorilor de schele, proiectanților și operatorilor de schele. Acestea acoperă planificarea, proiectarea, montarea, utilizarea, modificarea, demontarea și inspectarea schelelor, cu măsuri pentru prevenirea căderilor. Schelele trebuie proiectate, montate, modificate și demontate de persoane competente, sub supraveghere competentă, folosind Îndrumările de siguranță NASC SG4 „Prevenirea căderilor în timpul operațiunilor cu schele” sau îndrumări similare ale producătorilor. Acestea au nevoie de fundații adecvate, contravântuiri, legături, rezistență și stabilitate, clase de încărcare corespunzătoare, acces sigur și platforme complet acoperite cu dulapi. Balustradele, bordurile și barierele trebuie să asigure protecție împotriva căderilor, inclusiv o balustradă superioară de cel puțin 950 mm și protecție intermediară cu goluri de cel mult 470 mm. Inspecțiile sunt necesare înainte de prima utilizare, la fiecare 7 zile și după circumstanțe precum vânturi puternice.
Check your RAMS against this document
Related guidance
- Tower scaffolds
- Structural stability during alteration, demolition and dismantling
- Roof work
- Assessing all work at height
Tell me when HSE changes this
Tell me when HSE changes Scaffolds. A line in the Monday email when HSE withdraws, replaces, moves or updates this document, and no email when it does not.
Contains public sector information published by the Health and Safety Executive and licensed under the Open Government Licence v3.0. KASQ is not affiliated with HSE.