HSE web guidance, updated 29 June 2026
Process fire risks
Current. Last checked with HSE on 13 November 2026.
Guidance on HSE's website.
- Kind
- HSE web guidance, updated 29 June 2026
- HSE's date
- 29 June 2026
- Last checked
- 13 November 2026
The passage you were sent
What it says, in HSE's own words
What you need to do The Regulatory Reform (Fire Safety) Order 2005 sets out the law on construction site general fire safety, including means of escape. The CDM Regulations 2015 also impose duties including the requirement to prevent risk from fire. The fire risk from site activities must be assessed and precautions taken to control: Combustible material – the quantity of combustible materials on site should be kept to the minimum and all such materials safely stored and used. Ignition sources – action is needed to eliminate, reduce and control ignition sources on site.
Construction of timber frame buildings will require significant additional measures to those outlined here. You should refer to the specific guidance listed in Resources, below. What you need to know Each year there are a number of serious fires on construction sites and buildings undergoing refurbishment. Many could be avoided by careful planning and control of work activities. Any outbreak of fire threatens the safety of those on site and will be costly in damage and delay. It can also be a hazard to people in surrounding properties.
Quoted from HSE. Open the original on hse.gov.uk
Key points
The Regulatory Reform (Fire Safety) Order 2005 sets out general fire safety on construction sites, including means of escape, while the CDM Regulations 2015 include duties to prevent risk from fire. Fire risks from site activities must be assessed, with precautions taken to control combustible materials and ignition sources. Combustible materials should be kept to a minimum, safely stored and used, with good housekeeping and unobstructed emergency routes. Hot work controls include clearing combustible materials, suitable fire extinguishers and a careful watch.
Our summary of the document's own words. Check the original before you rely on it.
Machine-translated summary (Polish)
Regulatory Reform (Fire Safety) Order 2005 określa ogólne bezpieczeństwo pożarowe na placach budowy, w tym drogi ewakuacyjne, natomiast CDM Regulations 2015 obejmują obowiązki zapobiegania ryzyku pożaru. Ryzyko pożaru wynikające z działań na placu budowy musi być ocenione, a środki ostrożności podjęte w celu kontrolowania materiałów palnych i źródeł zapłonu. Materiały palne powinny być ograniczone do minimum, bezpiecznie przechowywane i używane, przy zachowaniu porządku oraz niezasłoniętych dróg ewakuacyjnych. Kontrole prac gorących obejmują usunięcie materiałów palnych, odpowiednie gaśnice i uważną obserwację.
Machine-translated summary (Romanian)
Regulatory Reform (Fire Safety) Order 2005 stabilește securitatea generală la incendiu pe șantierele de construcții, inclusiv căile de evacuare, iar CDM Regulations 2015 includ îndatoriri de prevenire a riscului de incendiu. Riscul de incendiu provenit din activitățile de pe șantier trebuie evaluat, iar măsurile de precauție luate pentru controlul materialelor combustibile și al surselor de aprindere. Materialele combustibile ar trebui menținute la minimum, depozitate și utilizate în siguranță, cu o bună ordine și căi de urgență neobstrucționate. Controalele pentru lucrările la cald includ îndepărtarea materialelor combustibile, stingătoare adecvate și supraveghere atentă.
Check your RAMS against this document
Related guidance
- General fire safety
- Administration
- Assessing all work at height
- Structural stability during alteration, demolition and dismantling
Tell me when HSE changes this
Tell me when HSE changes Process fire risks. A line in the Monday email when HSE withdraws, replaces, moves or updates this document, and no email when it does not.
Contains public sector information published by the Health and Safety Executive and licensed under the Open Government Licence v3.0. KASQ is not affiliated with HSE.