KASQSite safety, in the crew's language
Start free

← All HSE guidance

HSE publication GEIS2

Assessing the slip resistance of flooring

Current. Last checked with HSE on 15 November 2026.

Kind
HSE publication GEIS2
Edition
2012
Last checked
15 November 2026

What it says, in HSE's own words

This technical information sheet looks at test methods for assessing floor resistance and describes the tests HSE and HSL use in more detail. It is aimed at employers who need to measure floor slipperiness, such as manufacturers and research and testing bodies. It will also help employers and other dutyholders assess slip risks in workplaces by helping them interpret flooring manufacturers' test data.
This should allow them to make an informed decision when they choose new floors or monitor existing floors. Background Slips and trips are the most common cause of injury at work. On average, they cause over a third of all major injuries and over 40% of all reported injuries to members of the public. HSE statistics suggest that most of these accidents are slips, most of which happen when floor surfaces are contaminated (water, talc, grease, etc).

Quoted from HSE. Open the original on hse.gov.uk

Key points

This technical information sheet covers methods for assessing the slip resistance and slipperiness of flooring. It is aimed at employers who need accurate measurements, including manufacturers and research and testing bodies, and helps employers and other dutyholders assess workplace slip risks and interpret flooring manufacturers’ test data. It describes HSE’s preferred pendulum coefficient of friction (CoF) test, surface microroughness measurements and the HSL ramp test, including their use, interpretation and limitations. It also explains the Slips Assessment Tool (SAT), which combines Rz data with contamination, cleaning, footwear, human and environmental factors. Test data should relate to flooring finished for its intended use and normal contamination.

Our summary of the document's own words. Check the original before you rely on it.

Machine-translated summary (Polish)

Niniejsza techniczna karta informacyjna obejmuje metody oceny odporności posadzek na poślizg i ich śliskości. Jest skierowana do pracodawców potrzebujących dokładnych pomiarów, w tym producentów oraz jednostek badawczych i testujących, a także pomaga pracodawcom i innym osobom odpowiedzialnym za bezpieczeństwo oceniać ryzyko poślizgnięcia w miejscu pracy oraz interpretować dane z badań producentów posadzek. Opisuje preferowaną przez HSE metodę wahadłowego badania współczynnika tarcia (CoF), pomiary mikroszorstkości powierzchni oraz badanie rampowe HSL, w tym ich zastosowanie, interpretację i ograniczenia. Wyjaśnia także narzędzie do oceny poślizgnięć (SAT), które łączy dane Rz z czynnikami dotyczącymi zanieczyszczeń, czyszczenia, obuwia, ludzi i środowiska. Dane z badań powinny dotyczyć posadzki wykończonej zgodnie z przeznaczeniem i zanieczyszczeniami występującymi podczas normalnego użytkowania.

Machine-translated summary (Romanian)

Această fișă tehnică de informare acoperă metodele de evaluare a rezistenței la alunecare și a gradului de alunecare al pardoselilor. Se adresează angajatorilor care au nevoie de măsurători exacte, inclusiv producătorilor și organismelor de cercetare și testare, și îi ajută pe angajatori și pe alți responsabili să evalueze riscurile de alunecare la locul de muncă și să interpreteze datele de testare ale producătorilor de pardoseli. Descrie testul preferat de HSE cu pendulul pentru coeficientul de frecare (CoF), măsurătorile microrugozității suprafeței și testul pe rampă HSL, inclusiv utilizarea, interpretarea și limitele acestora. De asemenea, explică instrumentul de evaluare a alunecărilor (SAT), care combină datele Rz cu factorii privind contaminarea, curățarea, încălțămintea, factorii umani și cei de mediu. Datele de testare ar trebui să se refere la pardoseala finisată pentru utilizarea prevăzută și la contaminarea prezentă în utilizarea normală.

Contains public sector information published by the Health and Safety Executive and licensed under the Open Government Licence v3.0. KASQ is not affiliated with HSE.