HSE publication CIS65
Avoiding concealed services and overhead power lines
Current. Last checked with HSE on 11 November 2026.
- Kind
- HSE publication CIS65
- Last checked
- 11 November 2026
The passage you were sent
What it says, in HSE's own words
Avoiding concealed services and overhead power lines: What you need to know as a busy builder Don’t let your building project strike the wrong note. Protect people on your site by following these essential health and safety tips. ■ Before excavation starts, consult the utilities suppliers/site owner about buried gas pipes or electrical cables. Get hold of service plans. ■ To locate buried services use cable avoidance tools (CATs) and service plans.
… tools within 0.5m of the suspected route. ■ Take care using power tools to break through paved surfaces above gas pipes and cable routes. ■ Work well away from any overhead power lines when handling long items like scaffold poles, or using lifting equipment and MEWPs. ■ Or, arrange with the electricity supplier for overhead power lines to be shrouded (covered), or made dead or rerouted. ■ Pl ant working near overhead power lines shoul d not approach closer than: ■ 15m (plus length of jib) if the line is suspended from steel towers; or ■ 9m (plus length of jib) if the line is …
Quoted from HSE. Open the original on hse.gov.uk
Key points
This leaflet is for busy builders and people working on construction sites. It covers avoiding concealed services and overhead power lines, and gives notes on good practice that are not compulsory but may help in considering what needs to be done. Before excavation, consult utilities suppliers or the site owner about buried gas pipes and electrical cables and obtain service plans. Use cable avoidance tools (CATs), mark routes with paint or wooden pegs, and do not use mechanical excavators or power tools within 0.5m of a suspected route. Work well away from overhead lines, or arrange for them to be shrouded, made dead or rerouted. Plant should stay at least 15m (plus length of jib) from lines on steel towers and 9m (plus length of jib) from lines on wooden poles. Turn off electricity before drilling if cable locations are unknown.
Our summary of the document's own words. Check the original before you rely on it.
Machine-translated summary (Polish)
Ta ulotka jest przeznaczona dla zapracowanych budowlańców i osób pracujących na placach budowy. Dotyczy unikania zakrytych instalacji oraz napowietrznych linii energetycznych i zawiera uwagi dotyczące dobrej praktyki, które nie są obowiązkowe, ale mogą pomóc w rozważeniu tego, co należy zrobić. Przed rozpoczęciem wykopów skonsultuj się z dostawcami mediów lub właścicielem terenu w sprawie zakopanych rur gazowych i kabli elektrycznych oraz uzyskaj plany instalacji. Używaj przyrządów do unikania kabli (CAT), oznaczaj ich przebieg farbą lub drewnianymi kołkami i nie używaj koparek mechanicznych ani elektronarzędzi w odległości 0.5m od podejrzewanego przebiegu. Pracuj z dala od napowietrznych linii albo uzgodnij ich osłonięcie, wyłączenie lub przełożenie. Maszyny powinny pozostawać co najmniej 15m (plus długość wysięgnika) od linii na stalowych wieżach i 9m (plus długość wysięgnika) od linii na drewnianych słupach. Przed wierceniem wyłącz prąd, jeśli położenie kabli jest nieznane.
Machine-translated summary (Romanian)
Acest pliant se adresează constructorilor ocupați și persoanelor care lucrează pe șantiere. El tratează evitarea serviciilor ascunse și a liniilor electrice aeriene și oferă note despre bune practici, care nu sunt obligatorii, dar pot fi utile pentru a lua în considerare ce trebuie făcut. Înainte de începerea excavării, consultați furnizorii de utilități sau proprietarul amplasamentului cu privire la conductele de gaz și cablurile electrice îngropate și obțineți planurile serviciilor. Folosiți instrumente de evitare a cablurilor (CAT), marcați traseul cu vopsea sau țăruși de lemn și nu folosiți excavatoare mecanice sau scule electrice la mai puțin de 0.5m de traseul presupus. Lucrați la distanță mare de liniile aeriene sau aranjați ca acestea să fie protejate, scoase de sub tensi ori redirecționate. Utilajele trebuie să rămână la cel puțin 15m (plus lungimea brațului) de liniile suspendate de turnuri de oțel și 9m (plus lungimea brațului) de liniile susținute pe stâlpi de lemn. Opriți alimentarea cu electricitate înainte de găurire dacă poziția cablurilor nu este cunoscută.
Check your RAMS against this document
Tell me when HSE changes this
Tell me when HSE changes Avoiding concealed services and overhead power lines. A line in the Monday email when HSE withdraws, replaces, moves or updates this document, and no email when it does not.
Contains public sector information published by the Health and Safety Executive and licensed under the Open Government Licence v3.0. KASQ is not affiliated with HSE.